Progression Preview

The progression preview shows you the projected weight, reps, RIR, and sets for every exercise across every remaining week of your mesocycle — before you train them.

Why preview progression?

When targets are computed by formulas, it's natural to want to see what's coming. The preview answers questions like:

"What weight will I be squatting in Week 5?"
"How many sets will I do if my fatigue ratings stay neutral?"
"When does my RIR drop to 1?"
"Is the final week's weight realistic or am I going to crash?"

Seeing the full picture helps you make informed decisions about mesocycle length and when to take a deload.

What the preview shows

For each exercise in each future week, the preview displays:

Column	Description
Week	Week number and phase label (conservative / moderate / aggressive / deload)
Weight	Projected weight (steps up when you top out the range in weight mode; fixed in rep mode)
Reps	Target reps (climb the range then reset on a weight step in weight mode; increasing in rep mode)
RIR	Target Reps in Reserve for that week
Sets	Projected sets (based on current fatigue trajectory)

Summary vs. Detailed view

The preview offers two modes:

Summary shows a compact one-line-per-exercise view with sets×reps for the current week — useful for a quick glance at your training plan
Detailed expands each exercise into a full week-by-week table with weight, reps, RIR, and sets columns

Completed weeks vs. future weeks

Completed weeks show your actual logged data — what you really did, not what was prescribed
Current week shows per-day data: completed workout days display actual results, while pending workout days show projected targets. This means you see a consistent picture even when you're partway through a week — no misleading drops in volume from partial data
Future weeks show projected targets anchored on your most recent logged sets and fatigue history

This distinction matters. The preview is not a rigid plan — it's a projection that updates as you train and provide fatigue ratings.

How projections are calculated

Future targets use the same formulas as real-time workout targets:

Weight: The progression rule iterated forward from your actuals anchor (the best set of your most recent session): hold-and-climb, step one increment at the top of the range; single-value targets roll ~2% per week; rep mode holds the anchored working weight
Reps: Double-progression schedule in weight mode (climb the range, reset on a weight step), or linearly interpolated (rep mode)
RIR: From the RIR schedule scaled to your mesocycle length
Sets: Projected assuming neutral fatigue (rating = 0) for all future weeks — meaning sets hold steady at their current level

Why sets are projected with neutral fatigue

Sets depend on your fatigue ratings, which don't exist yet for future weeks. The preview assumes you'll rate everything as 0 (maintaining current volume). This gives you a baseline — your actual sets will diverge as you provide real ratings.

If you've been rating +1 consistently and want to see what happens if that continues, the AI coaching integration can model that scenario for you.

Reading the preview

Spotting problems early

The preview helps you catch issues before you're stuck mid-workout:

Final week looks impossible? Because the projection anchors on your real recent sets, an unrealistic final week usually means accumulated fatigue is due — consider a deload rather than a settings change. The projection re-anchors after every session, so it also self-corrects as you train.

Everything looks too easy? Lift more — the plan follows your actuals. Beat the targets and the projection climbs with you at the very next session.

RIR transition too abrupt? Check where the schedule shifts from RIR 3 to RIR 2, and from RIR 2 to your min RIR. For shorter mesocycles the jumps are bigger. If that concerns you, consider a longer mesocycle.

Volume looks high? If sets have been climbing due to positive fatigue ratings and the preview shows 6–7 sets per exercise, you might be approaching your MRV. Watch for signs you need to take a deload.

Comparing weight and rep mode

The preview makes it easy to evaluate which progression mode suits an exercise:

Weight mode shows reps climbing the range at a fixed weight, then the weight stepping up one increment with reps reset to the equivalent — good for compound lifts where small weight jumps are practical
Rep mode shows reps climbing while weight stays fixed for the whole mesocycle — better when even one increment is a large jump (e.g., 30 lb dumbbells can't go to 32.5)

Both modes progress reps within the range; the difference is whether (and how soon) the weight steps up.

How the preview updates

The progression preview is not static — it recalculates whenever the inputs change:

Change	Effect on preview
Submit a fatigue rating	Future set projections update based on new volume level
Log a session	All future weeks re-anchor on the new actuals
Mark a week as deload	Deload week shows reduced targets; surrounding weeks re-index
Change mesocycle length	RIR schedule and total progression recalculate
AI override applied	Overridden weeks show the AI's suggested targets

Example previews

Full mesocycle preview — weight mode

Barbell Bench Press — anchored at 200 lbs (your most recent logged working weight), 5 lb increment, single rep target 8, 3 base sets, min RIR 1, 6 loading weeks + deload

You're about to start the mesocycle. Here's the full preview:

Week	Phase	Weight	Reps	RIR	Sets	Notes
1	Conservative	200 lbs	8	3	3	Comfortable start
2	Conservative	205 lbs	8	3	3	+5 lbs
3	Moderate	210 lbs	8	2	3	RIR drops to 2
4	Moderate	210 lbs	8	2	3	Same weight (rounding)
5	Moderate	215 lbs	8	2	3	+5 lbs
6	Aggressive	220 lbs	8	1	3	Peak week
7	Deload	200 lbs	4	—	2	Recovery

Sets show 3 throughout because no fatigue ratings exist yet (all projected as 0). As you train and rate fatigue, the set column will update for remaining weeks.

Full mesocycle preview — rep mode

Dumbbell Lateral Raises — working weight 30 lbs (from your last session), 5 lb increment, rep range 8–12, 2 base sets, min RIR 0, 5 loading weeks + deload

Week	Phase	Weight	Reps	RIR	Sets	Notes
1	Conservative	30 lbs	8	3	2	Bottom of range
2	Conservative	30 lbs	9	3	2	+1 rep
3	Moderate	30 lbs	10	2	2	Midpoint
4	Moderate	30 lbs	11	2	2	Approaching top
5	Aggressive	30 lbs	12	0	2	Top of range, to failure
6	Deload	30 lbs	4	—	2	Recovery

Weight stays at 30 lbs throughout. If you hit 12 reps in Week 5, the next mesocycle bumps to 35 lb dumbbells and resets to 8 reps.

Preview mid-cycle with fatigue history

Barbell Squat — anchored at 270 lbs, 5 lb increment, single rep target 8, 3 base sets, 6 loading weeks + deload. You're on Week 3 and have submitted fatigue ratings for Weeks 1 and 2.

Week	Phase	Weight	Reps	RIR	Sets	Status
1	Conservative	270 lbs	8	3	3	Logged: 270 × 8, 8, 7 (3 sets)
2	Conservative	275 lbs	8	3	4	Logged: 275 × 8, 8, 8, 7 (4 sets) — rated +1
3	Moderate	280 lbs	8	2	4	Current — rated 0 after W2
4	Moderate	280 lbs	8	2	4	Projected (assumes rating 0)
5	Moderate	285 lbs	8	2	4	Projected
6	Aggressive	290 lbs	8	1	4	Projected
7	Deload	270 lbs	4	—	2	Projected

Weeks 1–2 show actual logged data (including the extra set from the +1 rating). Week 3 is the current target. Weeks 4–7 are projections that assume neutral fatigue going forward — if you rate -1 on Week 3, the preview will update to show 3 sets for Weeks 4+.

Preview with deload every 4 weeks

Deadlift — reference 365 lbs, 5 lb increment, 5 reps, 3 base sets, min RIR 1, 10-week mesocycle, deload every 4 weeks

Week	Phase	Weight	Reps	RIR	Sets	Notes
1	Conservative	310 lbs	5	3	3	Loading week 1
2	Conservative	315 lbs	5	3	3	Loading week 2
3	Conservative	320 lbs	5	3	3	Loading week 3
4	Deload	310 lbs	3	—	2	Scheduled deload
5	Moderate	325 lbs	5	2	3	Loading week 4 — continues from W3
6	Moderate	330 lbs	5	2	3	Loading week 5
7	Moderate	340 lbs	5	2	3	Loading week 6
8	Deload	310 lbs	3	—	2	Scheduled deload
9	Aggressive	345 lbs	5	1	3	Loading week 7 — continues from W7
10	Moderate	350 lbs	5	2	3	Loading week 8

Notice how Week 5 (loading week 4) continues the weight progression smoothly from Week 3 (loading week 3) — the deload gap doesn't inflate the curve. Sets reset to base (3) after each deload.

Preview after out-lifting the plan

Overhead Press — 5 lb increment, rep range 6–10, 6 loading weeks + deload. In Week 2 the plan said 100×7, but you felt strong and logged 110×8.

Week	Phase	Weight	Reps	RIR	Sets	Notes
1	Conservative	~~100 lbs~~	6	3	3	Logged
2	Conservative	~~110 lbs~~	8	3	3	Logged — you beat the plan
3	Moderate	110 lbs	9	2	3	Re-anchored on your 110×8
4	Moderate	110 lbs	10	2	3	climbs to the top of the range
5	Moderate	115 lbs	9	2	3	steps up one increment
6	Aggressive	115 lbs	10	1	3	Peak week
7	Deload	115 lbs	3	—	2	% of working weight, half reps

The projection follows your actuals immediately: weeks 3+ re-anchor on the 110×8 you actually did, not the 100×7 that was planned. Nothing to edit, no setting to update — out-lift the plan and the plan catches up to you.

Deload weeks in the preview

Deload weeks appear in the preview with their reduced targets:

Weight resets to the starting weight (or a configured percentage)
Sets drop to the deload set count (default 2)
Reps are roughly halved
RIR shows "—" (easy effort, no target)

The preview also shows how progression resumes after the deload — loading week numbering skips over deload gaps, so the jump from pre-deload to post-deload is the same ~2% as any other week.